Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Mining Publication: Static and Dynamic Loads in Ore and Waste Rock Passes in Underground Mines

NOTE: This page is archived for historical purposes and is no longer being maintained or updated. Contact NIOSH Mining if you need an accessible version.

Original creation date: June 1999

Image of publication Static and Dynamic Loads in Ore and Waste Rock Passes in Underground Mines

This paper describes research to improve safety during transport of ore and waste in underground mines. Field test are underway in mines in Idaho and Montana. Strains measured on structural support members in an ore pass provided information about total forces acting on the structure as material was dumped into it. Results show that measured static loads were considerably less than actual total weight of the material dumped and that dynamic loads were subject to many factors, such as effects of blasting to remove hang-ups. Comparisons of measurements and computer results using a particle flow code indicated that several difficulties remain before achieving realistic determination and models of the dynamic effects of particle flow in ore passes and impact loads on the gates. Impact loads were overestimated in computer analyses as compared to loads measured in field tests. An alternative design approach based on softening the chute and control gate assembly is being proposed.

Authors: MJ Beus, SR Iverson, A Dreschler, VA Scott

Conference Paper - June 1999

NIOSHTIC2 Number: 20028121

In: Rock Mechanics for Industry - Proceedings of the 37th U.S. Rock Mechanics Symposium, Vail, Colorado, June 6-9, 1999. Rotterdam, Netherlands: A. A. Balkema Publishers, 1999 Jun; :489-495


TOP