Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Mining Publication: Less Sound Underground: Reducing Roof Bolting Machine Drilling Noise

NOTE: This page is archived for historical purposes and is no longer being maintained or updated.

Original creation date: April 2010

Image of publication Less Sound Underground: Reducing Roof Bolting Machine Drilling Noise

National Institute for Occupational Safety and Health (NIOSH) researchers strive to reduce noise-induced hearing loss for coal miners. The highest occurrence of hazardous noise exposure in the United States is within the mining industry, where 24% of miners have a reported hearing loss as a result. To find out the causes, NIOSH reviewed surveillance data from the Department of Labor Mine Safety and Health Administration (MSHA) on noise exposure in the mining industry. This study revealed which machine operators exceed 100% noise dose per the MSHA Permissible Exposure Level (PEL) - the noise limit a mine worker can be exposed to for their shift. To reduce noise overexposure for miners, researchers have developed noise controls that reduce the sound at the operator's position. For one machine in particular, a roof bolting machine (RBM), NIOSH partnered with Corry Rubber Corporation and Kennametal, Inc. to develop a suite of noise controls. This article presents the most significant findings from that research. A detailed report on the noise control suite is listed in the reference section. The control suite reduces sound levels at the operator’s ear by over 77%. This is significant because an RBM operator is the second-most likely of all underground coal mining equipment operators to be overexposed to noise.

Authors: MJ Lowe, JS Peterson, DS Yantek, LA Alcorn, RJ Michael

Conference Paper - April 2010

NIOSHTIC2 Number: 20037503

Proceedings of the 2010 National Conference on Noise Control Engineering and 159th Meeting of the Acoustical Society of America, Baltimore, Maryland, April 19-21, 2010. Burroughs CB; Maling G; eds., Indianapolis, IN: Institute of Noise Control Engineering of the USA, 2010; :1-6


TOP