Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Mining Product: Explosion Pressure Design Criteria for New Seals in U.S. Coal Mines

Original creation date: July 2007

Image of publication Explosion Pressure Design Criteria for New Seals in U.S. Coal Mines

Seals are used in underground coal mines throughout the United States to isolate abandoned mining areas from the active workings. Prior to the Sago Mine disaster in 2006, mining regulations required seals to withstand a 140-kPa (20-psig) explosion pressure (30 CFR4 75.335(a)(2)). However, Program Information Bulletin No. P06-16 issued by MSHA on July 19, 2006 [McKinney 2006], requires seals to withstand a 345-kPa (50-psig) explosion pressure. The recently enacted MINER Act requires MSHA to increase this design standard by the end of 2007. This report provides a sound scientific and engineering justification to recommend a three-tiered explosion pressure design criterion for new seals in coal mines in response to the MINER Act. The recommendations contained herein apply to new seal design and construction in U.S. coal mines.

Authors: RK Zipf, MJ Sapko, JF Brune

Information Circular - July 2007

NIOSHTIC2 Number: 20032239

Pittsburgh, PA: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2007-144, Information Circular 9500, 2007 July; :1-76


TOP