Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Mining Publication: Stability Analysis of a Backfilled Room-and-Pillar Mine

Original creation date: January 1995

Image of publication Stability Analysis of a Backfilled Room-and-Pillar Mine

Displacement and stress changes in cemented backfill and ore pillars at the Buick Mine, near Boss, Missouri, were monitored by engineers from the U.S. Bureau of Mines and The Doe Run Company, St. Louis, Missouri. A test area in this room-and-pillar mine was backfilled to provide support when remnant ore pillars were mined. Objectives of this research were to evaluate the effect of backfill on mine stability, observe backfill conditions during pillar removal, and calibrate a numeric model to be used to design other areas of the mine. Relative vertical displacements in the backfill were measured with embedment strain gauges and vertical extensometers. Other types of instruments used were earth pressure cells (to identify loading trends in the backfill), borehole extensometers (to measure relative displacement changes in the mine roof and support pillars), and biaxial stressmeters (to measure stress changes in several support pillars and abutments). Two- and three-dimensional numeric codes were used to model the study area. With information from these codes and the installed instruments, two failed pillars were identified and rock mass properties were estimated.

Authors: DR Tesarik, JB Seymour, TR Yanske, RW McKibbin

Report of Investigations - January 1995

NIOSHTIC2 Number: 20025284

U.S. Department of the Interior, Bureau of Mines, Report of Investigations 9565. NTIS stock number: PB95-251872, 1995 Jan; :1-20


TOP