Mining Publication: Effects of Water Sprays Used With a Machine-Mounted Scrubber on Face Methane Concentrations
Original creation date: February 2001
Past studies with blowing face ventilation systems have shown that using a machine-mounted scrubber and water sprays can reduced methane levels at the face. The current research was conducted to determine how the sprays and scrubber interact to reduce methane levels, and what spray configurations provide the best face ventilation when used with a scrubber. Testing was conducted in a ventilation test gallery designed to simulate a full-scale mine entry. In the entry, a model mining machine, equipped with a simulated dust scrubber and water spray systems, was located at the face of a 6.1 m (20 ft) box cut. Face ventilation was provided by a blowing curtain located 12.2 m (40 ft) from the face. Methane released from a manifold at the face was measured at six locations near the face to compare the ventilation effectiveness of the spray systems while operating with and without the scrubber. Airflow movement across the face was affected by the spray configuration and scrubber operation. Average face concentrations were lowest when directed sprays were used with the scrubber. Varying the direction of the scrubber exhaust affected face methane levels.
Authors: CD Taylor, JA Zimmer
Conference Paper - February 2001
NIOSHTIC2 Number: 20027466
2001 SME Annual Meeting, February 26-28, 2001, Denver, Colorado, preprint 01-114. Littleton, CO: Society for Mining, Metallurgy, and Exploration, 2001 Feb; :1-6
See Also
- Comparison of Methane Concentrations at a Simulated Coal Mine Face During Bolting
- Effect of Water Sprays on Airflow Movement and Methane Dilution at the Working Face
- Effects of Water Sprays and Scrubber Exhaust on Face Methane Concentrations
- Guidelines for the Control and Monitoring of Methane Gas on Continuous Mining Operations
- Impact of Unbalanced Intake and Scrubber Flows on Face Methane Concentrations
- Prediction of Longwall Methane Emissions and the Associated Consequences of Increasing Longwall Face Lengths: A Case Study in the Pittsburgh Coalbed
- Simulation of Methane Flows in Noncoal Mines
- Technology News 465 - Method for Predicting Methane Emissions on Extended Longwall Faces
- Using Ultrasonic Anemometers to Evaluate Face Ventilation Conditions
- Using Water Sprays to Improve Performance of a Flooded-Bed Dust Scrubber
- Page last reviewed: 9/21/2012
- Page last updated: 9/21/2012
- Content source: National Institute for Occupational Safety and Health, Mining Program