Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Mining Publication: Dust Considerations When Using Belt Entry Air to Ventilate Work Areas

Original creation date: January 1992

Image of publication Dust Considerations When Using Belt Entry Air to Ventilate Work Areas

In this U.S. Bureau of Mines study, four underground respirable dust surveys were conducted to determine factors affecting belt entry dust levels and how using belt air to ventilate work areas affected dust exposures. Belt entry dust levels on the surveyed longwall and continuous miner sections averaged 0.59 and 0.26 Mg/m3, respectively. The stageloader-crusher contributed an additional 0.5 to 0.9 Mg/m3 of dust to belt air, while the feeder-breaker contributed 0 to 0.2 Mg/m3 of dust. A 1,000-ft increase in belt entry length or a 200- to 500-st-per-shift increase in production resulted in roughly a 0.1-Mg/m3 increase in dust. Using the belt entry as an intake entry on the continuous miner section appeared to reduce dust levels by 0.1 to 0.3 Mg/m3 during cutting. Belt air was not used to ventilate the face on the longwall section.

Authors: JD Potts, RA Jankowski

Report of Investigations - January 1992

NIOSHTIC2 Number: 10011449

Pittsburgh, PA: U.S. Department of the Interior, Bureau of Mines, RI 9426, 1992 Jan; :1-12


TOP