Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Mining Publication: Test Results of Collision Warning Systems on Off-Highway Dump Trucks: Phase 2

Original creation date: February 2001

Image of publication Test Results of Collision Warning Systems on Off-Highway Dump Trucks: Phase 2

This report summarizes ongoing research at the National Institute for Occupational Safety and Health, Spokane Research Laboratory, in which collision warning systems for surface mining dump trucks are being evaluated. Common accidents involve these large trucks running over smaller vehicles or pedestrian workers. Collision warning systems currently use one of several methods, including radar, radio-frequency-signal detection, or ultrasonic signals, to detect and warn of the presence of an object or person in the blind spots of the mining equipment. Most available systems have not been tested on large off-highway dump trucks. This report evaluates several systems on two sizes of trucks, a 50-ton-capacity truck commonly used in quarries and construction and a 240-ton-capacity truck commonly used in open-pit mines. Tests were conducted to determine false alarm rates, alarm effectiveness, and reliable detection zones for a person and a pickup truck. The results indicate that radar and radiofrequency identification systems show promise for this application and that several of the improved systems are ready for extensive field tests. However, challenges still exist in applying these technologies to large trucks.

Authors: TM Ruff

Report of Investigations - February 2001

NIOSHTIC2 Number: 20000975

U.S. Department of Health and Human Services, National Institute for Occupational Safety and Health, Report of Investigations 9654, 2001 Feb; :1-21


TOP