Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Mining Publication: Feasibility Study to Reduce Injuries and Fatalities Caused by Contact of Cranes, Drill Rigs, and Haul Trucks with High-Tension Lines

Original creation date: May 2001

Image of publication Feasibility Study to Reduce Injuries and Fatalities Caused by Contact of Cranes, Drill Rigs, and Haul Trucks with High-Tension Lines

Overhead electric power lines present a serious electrocution hazard to personnel in a variety of industries. Overhead lines, typically uninsulated conductors supported on towers or poles, are the most common means of electric power transmission and distribution, and are exposed to contact by mobile equipment such as cranes and trucks. Equipment contacting energized overhead lines becomes elevated to a high voltage, and simultaneous contact by personnel of the "hot" frame and ground can cause serious electrical shock and burns. Industries where risk of these accidents is greatest include construction, mining, agriculture, and communications/public utilities. An estimated 2300 accidental overhead line contacts occur each year in the U.S. This paper describes a practical low-cost concept to detect actual contact of mobile equipment with a high-voltage line and provide a warning. Accident statistics indicate that more than half of the fatalities could be prevented by such a device.

Authors: HK Sacks, JC Cawley, GT Homce, MR Yenchek

Peer Reviewed Journal Article - May 2001

NIOSHTIC2 Number: 20021860

IEEE Trans Ind Appl, 37(3), 2001 (May/June); :914-919


TOP