Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

MultiVapor™ Version 2.2.4 Application

DHHS (NIOSH) Publication No. 2010-124C (supersedes 2007-129C)

Updated February 9, 2016

MultiVapor™ is a computer tool for estimating breakthrough times and service lives of air-purifying respirator cartridges manufactured to remove toxic organic vapors (OV) from breathed air. It can also be used for larger filters and for carbon beds of any size prepared for laboratory studies. MultiVapor 2.2.4 was updated in January 2016. With this update, 66 new compounds, including TDI, MDI, and Stryene have been added to the library. In addition, the typical OV cartridge parameters are more representative of commonly used cartridges. They were obtained by averaging three popular cartridge parameters.

A breakthrough time is the time following the first and continuous use of a cartridge after which the user of the cartridge could be exposed to a selected concentration of a harmful vapor. This is the consequence of the cartridge being used up. Service life is the breakthrough time with, possibly, a safety factor applied.

MultiVapor™ is intended to help an industrial hygienist or other qualified person to set cartridge change-out schedules. It is not a substitute for regulatory requirements or professional judgments.

Users must assume full responsibility for any application of the MultiVapor™ computer software. No warranties related to the software are expressed or implied by the National Institute for Occupational Safety and Health (NIOSH) or its contractors. This software is intended to provide estimates based on the latest scientific information. The accuracies of any such estimates will depend in part on the accuracy and validity of the data entered by the user.

Installing the MultiVapor™ Application

This is a version of MultiVapor™ designed to load and operate on both 32 bit and 64 bit windows operating systems.
You may need administrative privileges on your computer to install this new version. You may also need to delete any previous version of this application before downloading a newer version.

  1. Download MultiVapor-Setup.exe to your PC.
  2. Once downloaded, double click on the MultiVapor-Setup.exe and follow the on screen instructions. The instructions listed below reflect the on-screen instructions.
  3. The screen, Welcome to the MultiVapor Setup Wizard appears, click Next to continue with the installation.
  4. Select the radio button next to: I accept the agreement once you have read the license agreement to proceed with the installation. Click Cancel to exit the application and quit the setup process.
  5. The screen, Select Destination Location appears: This screen appears with the default C:Program FilesMultiVapor folder location listed. Click the Next button to proceed. Select the Browse button to select a different location other than the default one listed. Note: At least 2 MB of Free Disk Space is required for the installation of the MultiVapor Application.
  6. The screen, Select the Start Menu Folder appears, click the Next button to proceed. Setup will create the program’s shortcuts in the following Start Menu folder – MultiVapor.
  7. The screen, Select Additional Tasks appears, click the Next button to proceed. This will create a desktop icon for the MultiVapor application.
  8. The screen, Ready to Install appears, click Install.
  9. The application begins to install. After installation click Finish.

Multivapor™ Tutorials

  1. Windows Media Player
  2. Real Player
  3. PDF Format [PDF – 24 KB]
TOP