Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Maleic anhydride

Synonyms & Trade Names
cis-Butenedioic anhydride, 2,5-Furanedione, Maleic acid anhydride, Toxilic anhydride
CAS No.
108-31-6
RTECS No.
ON3675000
DOT ID & Guide
2215 156
Formula
C₄H₂O₃
Conversion
1 ppm = 4.01 mg/m3
IDLH
10 mg/m3
See: 108316
Exposure Limits
NIOSH REL
TWA 1 mg/m3 (0.25 ppm)
OSHA PEL
TWA 1 mg/m3 (0.25 ppm)
Measurement Methods
NIOSH 3512;
OSHA 25 , 86
See: NMAM or OSHA Methods
Physical Description
Colorless needles, white lumps, or pellets with an irritating, choking odor.
Molecular Weight
98.1
Boiling Point
396°F
Melting Point
127°F
Solubility
Reacts
Vapor Pressure
0.2 mmHg
Ionization Potential
9.90 eV
Specific Gravity
1.48
Flash Point
218°F
Upper Exposive Limit
7.1%
Lower Explosive Limit
1.4%
Combustible Solid, but may be difficult to ignite.
Incompatibilities & Reactivities
Strong oxidizers, water, alkalis, metals, caustics & amines above 150°F [Note: Reacts slowly with water (hydrolyzes) to form maleic acid.]
Exposure Routes
inhalation, ingestion, skin and/or eye contact
Symptoms
irritation nose, upper respiratory system; conjunctivitis; photophobia (abnormal visual intolerance to light), double vision; bronchial asthma; dermatitis
Target Organs
Eyes, skin, respiratory system
Personal Protection/Sanitation
(See protection codes)
Skin:Prevent skin contact
Eyes:Prevent eye contact
Wash skin:When contaminated
Remove:When wet or contaminated
Change:No recommendation
Provide:Eyewash
First Aid
(See procedures)
Eye:Irrigate immediately
Skin:Soap wash immediately
Breathing:Respiratory support
Swallow:Medical attention immediately
Respirator Recommendations

NIOSH/OSHA

Up to 10 mg/m3:
(APF = 25) Any supplied-air respirator operated in a continuous-flow mode£
(APF = 50) Any self-contained breathing apparatus with a full facepiece
(APF = 50) Any supplied-air respirator with a full facepiece

Emergency or planned entry into unknown concentrations or IDLH conditions:
(APF = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode
(APF = 10,000) Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained positive-pressure breathing apparatus

Escape:
(APF = 50) Any air-purifying, full-facepiece respirator (gas mask) with a chin-style, front- or back-mounted organic vapor canister having an N100, R100, or P100 filter.
Click here for information on selection of N, R, or P filters.
Any appropriate escape-type, self-contained breathing apparatus

Important additional information about respirator selection

See also
INTRODUCTION   ICSC CARD: 0799   MEDICAL TESTS: 0256
TOP