Skip directly to search Skip directly to A to Z list Skip directly to page options Skip directly to site content

DIISOBUTYLAMINE

ICSC: 1442

N,N-Bis(2-methylpropyl)amine
1-Propanamine, 2-methyl-N-(2-methylpropyl)-
2-Methyl-N-(2-methylpropyl)-1-propanamine
C8H19N / CH3CH(CH3)CH2NHCH2CH(CH3)CH3
Molecular mass: 129.3
ICSC # 1442
CAS # 110-96-3
RTECS # TX1750000
UN # 2361
September 10, 2002 Validated

TYPES OF HAZARD/ EXPOSURE

ACUTE HAZARDS/ SYMPTOMS

PREVENTION

FIRST AID/
FIRE FIGHTING

FIRE Flammable. Gives off irritating or toxic fumes (or gases) in a fire.
NO open flames, NO sparks, and NO smoking. NO contact with oxidants.
Powder, alcohol-resistant foam, water spray, carbon dioxide.
EXPLOSION Above 29°C explosive vapour/air mixtures may be formed.
Above 29°C use a closed system, ventilation, and explosion-proof electrical equipment.
In case of fire: keep drums, etc., cool by spraying with water.
EXPOSURE
PREVENT GENERATION OF MISTS! AVOID ALL CONTACT!
IN ALL CASES CONSULT A DOCTOR!
•INHALATION Burning sensation. Cough. Sore throat. Laboured breathing. Shortness of breath. Symptoms may be delayed (see Notes).
Ventilation, local exhaust, or breathing protection.
Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.
•SKIN Redness. Pain. Skin burns.
Protective gloves. Protective clothing.
First rinse with plenty of water, then remove contaminated clothes and rinse again. Refer for medical attention.
•EYES Redness. Pain. Severe deep burns.
Face shield, or eye protection in combination with breathing protection.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
•INGESTION Burning sensation. Abdominal pain. Shock or collapse.
Do not eat, drink, or smoke during work.
Rinse mouth. Give plenty of water to drink. Do NOT induce vomiting. Refer for medical attention.

SPILLAGE DISPOSAL

STORAGE

PACKAGING & LABELLING

Remove all ignition sources. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent and remove to safe place. Wash away remainder with plenty of water. Do NOT wash away into sewer. Do NOT let this chemical enter the environment. (Extra personal protection: complete protective clothing including self-contained breathing apparatus.)
Fireproof. Separated from food and feedstuffs, strong oxidants, strong acids.
Do not transport with food and feedstuffs. Unbreakable packaging; put breakable packaging into closed unbreakable container.
UN Hazard Class: 3
UN Subsidiary Risks: 8
UN Packing Group: III
ICSC: 1442 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

DIISOBUTYLAMINE

ICSC: 1442

I

M

P

O

R

T

A

N

T


D

A

T

A

PHYSICAL STATE; APPEARANCE:
COLOURLESS LIQUID , WITH CHARACTERISTIC ODOUR.

PHYSICAL DANGERS:


CHEMICAL DANGERS:
The substance decomposes on burning producing toxic fumes including nitrogen oxides . The substance is a medium strong base. Reacts with acids and oxidants causing fire and explosion hazard. Attacks copper and zinc and their alloys, aluminum and galvanized steel. Solutions in water slowly etch glass.

OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.


ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation, through the skin and by ingestion.

INHALATION RISK:
No indication can be given about the rate in which a harmful concentration in the air is reached on evaporation of this substance at 20°C.

EFFECTS OF SHORT-TERM EXPOSURE:
The substance is corrosive to the eyes, the skin and the respiratory tract. Corrosive on ingestion. Inhalation may cause lung oedema (see Notes). The effects may be delayed. Medical observation is indicated.

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:

PHYSICAL
PROPERTIES

Boiling point: 140°C
Melting point: -74°C
Relative density (water = 1): 0.75
Solubility in water, g/100 ml at 25°C: 0.22
Vapour pressure, kPa at 25°C: 0.97
Relative vapour density (air = 1): 4.5
Relative density of the vapour/air-mixture at 20°C (air = 1): 1.03
Flash point: 29°C c.c.
Octanol/water partition coefficient as log Pow: 2.84/3.04

ENVIRONMENTAL
DATA

The substance is harmful to aquatic organisms.

N O T E S

The symptoms of lung oedema often do not become manifest until a few hours have passed and they are aggravated by physical effort. Rest and medical observation is therefore essential. Immediate administration of an appropriate inhalation therapy by a doctor or a person authorized by him/her, should be considered.
NFPA Code: H3; F3; R0;

Transport Emergency Card: TEC (R)-30GFC-III

ADDITIONAL INFORMATION



ICSC: 1442 DIISOBUTYLAMINE
(C) IPCS, CEC, 1994
IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.
Top