Skip directly to search Skip directly to A to Z list Skip directly to page options Skip directly to site content
NIOSH

CHLORENDIC ANHYDRIDE

ICSC: 1373

4,5,6,7,8,8-Hexachloro-3a,4,7,7a-tetrahydro-4,7-methanoisobenzofuran-1,3-dione
1,4,5,6,7,7-Hexachloro-endo-5-norbornene-2,3-dicarboxylic anhydride
Hexachloro-endo-methylene tetrahydrophthalic anhydride
C9H2Cl6O3
Molecular mass: 370.8
ICSC # 1373 		CAS # 115-27-5
RTECS # RB9080000
EC # 607-101-00-4
March 14, 2001 Validated

TYPES OF HAZARD/ EXPOSURE

ACUTE HAZARDS/ SYMPTOMS

PREVENTION

FIRST AID/
FIRE FIGHTING

FIRE Not combustible. Gives off irritating or toxic fumes (or gases) in a fire.

In case of fire in the surroundings: use appropriate extinguishing media.
EXPLOSION


EXPOSURE
PREVENT DISPERSION OF DUST!

•INHALATION Cough. Sore throat. Wheezing. Shortness of breath.
Local exhaust or breathing protection.
Fresh air, rest. Half-upright position. Refer for medical attention.
•SKIN Redness. Burning sensation.
Protective gloves. Protective clothing.
Remove contaminated clothes. Rinse skin with plenty of water or shower.
•EYES Redness. Pain.
Safety goggles, or eye protection in combination with breathing protection.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
•INGESTION Burning sensation.
Do not eat, drink, or smoke during work. Wash hands before eating.
Rinse mouth. Do NOT induce vomiting.

SPILLAGE DISPOSAL

STORAGE

PACKAGING & LABELLING

Sweep spilled substance into containers; if appropriate, moisten first to prevent dusting. Wash away remainder with plenty of water. (Extra personal protection: P2 filter respirator for harmful particles.)
Dry. Well closed.

Xi symbol
R: 36/37/38
S: 2-25
ICSC: 1373 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

CHLORENDIC ANHYDRIDE

ICSC: 1373

I

M

P

O

R

T

A

N

T


D

A

T

A

PHYSICAL STATE; APPEARANCE:
WHITE CRYSTALS

PHYSICAL DANGERS:


CHEMICAL DANGERS:
Reacts with water to produce chlorendic acid.

OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.


ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation of its aerosol.

INHALATION RISK:
Evaporation at 20°C is negligible; a harmful concentration of airborne particles can, however, be reached quickly when dispersed.

EFFECTS OF SHORT-TERM EXPOSURE:
The substance is irritating to the eyes , the skin and the respiratory tract .

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
Repeated or prolonged contact may cause skin sensitization. Repeated or prolonged inhalation exposure may cause asthma.

PHYSICAL
PROPERTIES

Melting point: 231-235°C
Density: 1.73
g/cm3
Solubility in water:
reaction

ENVIRONMENTAL
DATA


N O T E S

The symptoms of asthma often do not become manifest until a few hours have passed and they are aggravated by physical effort. Rest and medical observation are therefore essential. Anyone who has shown symptoms of asthma due to this substance should avoid all further contact with this substance.

ADDITIONAL INFORMATION



ICSC: 1373 CHLORENDIC ANHYDRIDE
(C) IPCS, CEC, 1994
IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.
Top