Skip directly to search Skip directly to A to Z list Skip directly to page options Skip directly to site content

SODIUM SULFIDE (ANHYDROUS)

ICSC: 1047

Sodium monosulfide
Sodium sulphide
Na2S
Molecular mass: 78.04
ICSC # 1047
CAS # 1313-82-2
RTECS # WE1905000
UN # 1385
EC # 016-009-00-8
October 10, 2002 Validated

TYPES OF HAZARD/ EXPOSURE

ACUTE HAZARDS/ SYMPTOMS

PREVENTION

FIRST AID/
FIRE FIGHTING

FIRE Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
NO open flames, NO sparks, and NO smoking. NO contact with acid(s),oxidants.
Water in large amounts, water spray, foam, dry powder.
EXPLOSION


EXPOSURE
AVOID ALL CONTACT!
IN ALL CASES CONSULT A DOCTOR!
•INHALATION Cough. Burning sensation. Laboured breathing. Shortness of breath. Sore throat.
Closed system and ventilation.
Fresh air, rest. Refer for medical attention.
•SKIN Redness. Pain. Skin burns. Blisters.
Protective gloves. Protective clothing.
First rinse with plenty of water, then remove contaminated clothes and rinse again. Refer for medical attention.
•EYES Redness. Pain. Blurred vision. Severe deep burns.
Face shield, or eye protection in combination with breathing protection.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
•INGESTION Abdominal pain. Burning sensation. Shock or collapse.
Do not eat, drink, or smoke during work.
Do NOT induce vomiting. Give plenty of water to drink. Refer for medical attention.

SPILLAGE DISPOSAL

STORAGE

PACKAGING & LABELLING

Remove all ignition sources. Cover the spilled material with dry earth or sand. Sweep spilled substance into containers. Carefully collect remainder, then remove to safe place. Do NOT let this chemical enter the environment. Chemical protection suit including self-contained breathing apparatus.
Separated from acids, oxidants . Keep in a well-ventilated room. Dry.
Airtight.
C symbol
N symbol
R: 31-34-50
S: 1/2-26-45-61
UN Hazard Class: 4.2
UN Packing Group: II
ICSC: 1047 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

SODIUM SULFIDE (ANHYDROUS)

ICSC: 1047

I

M

P

O

R

T

A

N

T


D

A

T

A

PHYSICAL STATE; APPEARANCE:
WHITE TO YELLOW HYGROSCOPIC CRYSTALS , WITH CHARACTERISTIC ODOUR.

PHYSICAL DANGERS:


CHEMICAL DANGERS:
The substance decomposes on burning, on contact with acids , water , producing toxic and corrosive gases , which increases fire hazard. The solution in water is a strong base, it reacts violently with acid and is corrosive. Reacts violently with oxidants .

OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.


ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation and through the skin and by ingestion.

INHALATION RISK:
A harmful concentration of airborne particles can be reached quickly when dispersed.

EFFECTS OF SHORT-TERM EXPOSURE:
The substance is corrosive to the eyes, the skin and the respiratory tract. Corrosive on ingestion.

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:

PHYSICAL
PROPERTIES

Melting point (decomposes): 920-950°C
Density: 1.86
g/cm3
Auto-ignition temperature: > 480°C
Octanol/water partition coefficient as log Pow: -3.5

ENVIRONMENTAL
DATA

This substance may be hazardous in the environment; special attention should be given to aquatic organisms.

N O T E S

Other UN number: 1849, sodium sulfide, hydrated with 30% or more water, hazard class 8, packaging group II. Other melting points: 1180°C in vacuum. Card has been partly updated in April 2005. See section Emergency Response.
Transport Emergency Card: TEC (R)-42GS4-II+III
NFPA Code: H3; F1; R1;

ADDITIONAL INFORMATION



ICSC: 1047 SODIUM SULFIDE (ANHYDROUS)
(C) IPCS, CEC, 1994
IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.
Top