Skip directly to search Skip directly to A to Z list Skip directly to page options Skip directly to site content

POLYDIMETHYLSILOXANE

ICSC: 0318

Dimethyl polysiloxane
(C2H6OSi)n
ICSC # 0318
CAS # 9016-00-6
RTECS # TQ2690000
October 15, 2001 Validated

TYPES OF HAZARD/ EXPOSURE

ACUTE HAZARDS/ SYMPTOMS

PREVENTION

FIRST AID/
FIRE FIGHTING

FIRE Combustible.
NO open flames.
Powder, AFFF, foam, carbon dioxide.
EXPLOSION


EXPOSURE


•INHALATION
Ventilation.
Fresh air, rest.
•SKIN
Protective gloves.
Remove contaminated clothes. Rinse skin with plenty of water or shower.
•EYES Redness. Pain.
Safety spectacles.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
•INGESTION Nausea. Vomiting. Diarrhoea.
Do not eat, drink, or smoke during work.
Rinse mouth. Do NOT induce vomiting.

SPILLAGE DISPOSAL

STORAGE

PACKAGING & LABELLING

Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent and remove to safe place.


ICSC: 0318 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

POLYDIMETHYLSILOXANE

ICSC: 0318

I

M

P

O

R

T

A

N

T


D

A

T

A

PHYSICAL STATE; APPEARANCE:
OILY COLOURLESS LIQUID .

PHYSICAL DANGERS:


CHEMICAL DANGERS:


OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.


ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation.

INHALATION RISK:
No indication can be given about the rate in which a harmful concentration in the air is reached on evaporation of this substance at 20°C.

EFFECTS OF SHORT-TERM EXPOSURE:
The substance is irritating to the eyes .

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:

PHYSICAL
PROPERTIES

Melting point: -50°C
Relative density (water = 1): 0.91-1.0
Solubility in water:
none
Flash point: >110°C
Octanol/water partition coefficient as log Pow: 2.6-4.25
Freezing point >110 deg C (Acros Chemical Catalogue)

ENVIRONMENTAL
DATA


N O T E S

ADDITIONAL INFORMATION



ICSC: 0318 POLYDIMETHYLSILOXANE
(C) IPCS, CEC, 1994
IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.
Top