Skip directly to search Skip directly to A to Z list Skip directly to navigation Skip directly to page options Skip directly to site content

Controlling Silica Dust from Foundry Casting-Cleaning Operations

1998
DHHS (NIOSH) Publication Number 98-106

Hazard

Exposure to respirable silica dust can lead to the development of silicosis, a debilitating and potentially deadly lung disease. In foundry operations, workers who clean small castings made from sand molds use various handheld chipping and grinding tools. If dust exposures are not adequately controlled, workers breathe in high concentrations of respirable silica

.

Controls

Studies conducted by the National Institute for Occupational Safety and Health (NIOSH) have shown that excessive concentrations of respirable silica are produced when cleaning castings made from sand molds. Use of the local exhaust ventilation (LEV) system described below significantly reduced worker exposures to respirable dust by 59% to 77% for various cleaning tools. This system may keep worker exposures to respirable silica below permissible limits and eliminate the need for workers to wear respirators

.

Local Exhaust Ventilation(LEV) System

  • The LEV system consists of a downdraft ventilation booth outfitted with a turntable for manipulating the castings. This system is designed to enclose and draw air contaminants downward through a grate opening at the working surface of the table for cleaning small castings. The table surface opening for this booth is approximately 5 ft long and 1.5 ft deep; airflow rate for the system was about 5,600 ft3/min. This LEV system exceeds the minimum recommended face capture velocity of 200 ft/min. The turntable allows the worker to have easy access for cleaning multiple surfaces and directing the dusts generated from the tools toward the grate opening, away from the breathing zone. (see ILLUSTRATIONS)

Illustrations: Ventilated Workstation with Turntable
Ventilated Workstation figure

†U.S. Patent 5569074. For other than single use, contact NIOSH Technology Transfer Coordinator (513/841-4321)

A technical report has been published: An evaluation of a local exhaust ventilation control system for a foundry casting-cleaning operation, Am Ind Hyg Assoc J (58): 354-358 (1997).

*NIOSH is the Federal agency responsible for conducting research and recommending measures for preventing work-related illnesses and injuries. All HAZARD CONTROLS are based on research studies that show how worker exposure to hazardous agents or activities can be significantly reduced.

Acknowledgments

The principal contributors to this publication are Michael G. Gressel, Rosmarie T. Hagedorn, and Jerome P. Flesch.

This document is in the public domain and may be freely copied or reprinted. NIOSH encourages all readers of this HAZARD CONTROLS to make it available to all interested employers and workers.

Controlling Silica Dust from Foundry Casting-Cleaning Operations [PDF - 80 KB]

Top