Photothermal therapy

Huang et al. investigated the feasibility of using gold nanorods for both cancer cell imaging as well as photothermal therapy.[2] The authors conjugated antibodies (anti-EGFR monoclonal antibodies) to the surface of gold nanorods, allowing the gold nanorods to bind specifically to certain malignant cancer cells (HSC and HOC malignant cells). After incubating the cells with the gold nanorods, an 800 nm Ti:sapphire laser was used to irradiate the cells at varying powers. The authors reported successful destruction of the malignant cancer cells, while nonmalignant cells were unharmed.

When AuNRs are exposed to NIR light, the oscillating electromagnetic field of the light causes the free electrons of the AuNR to collectively coherently oscillate.[3] Changing the size and shape of AuNRs changes the wavelength that gets absorbed. A desired wavelength would be between 700-1000 nm because biological tissue is optically transparent at these wavelengths.[4] While all AuNP properties are sensitive to change in their shape and size, Au nanorods properties are extremely sensitive to any change in any of their dimensions regarding their length and width or their aspect ratio. When light is shone on a metal NP, the NP forms a dipole oscillation along the direction of the electric field. When the oscillation reaches its maximum, this frequency is called the surface plasmon resonance (SPR).[3] AuNR have two SPR spectrum bands: one in the NIR region caused by its longitudinal oscillation which tends to be stronger with a longer wavelength and one in the visible region caused by the transverse electronic oscillation which tends to be weaker with a shorter wavelength.[5] The SPR characteristics account for the increase in light absorption for the particle.[3] As the AuNR aspect ratio increases, the absorption wavelength is redshifted[5] and light scattering efficiency is increased.[3] The electrons excited by the NIR lose energy quickly after absorption via electron-electron collisions, and as these electrons relax back down, the energy is released as a phonon that then heats the environment of the AuNP which in cancer treatments would be the cancerous cells. This process is observed when a laser has a continuous wave onto the AuNP. Pulsed laser light beams generally results in the AuNP melting or ablation of the particle.[3] Continuous wave lasers take minutes rather than a single pulse time for a pulsed laser, continues wave lasers are able to heat larger areas at once.[3]

Loo et al. investigated gold nanoshells, coating silica nanoparticles with a thin layer of gold.[6] The authors conjugated antibodies (anti-HER2 or anti-IgG) to these nanoshells via PEG linkers. After incubation of SKBr3 cancer cells with the gold nanoshells, an 820 nm laser was used to irradiate the cells. Only the cells incubated with the gold nanoshells conjugated with the specific antibody (anti-HER2) were damaged by the laser. Another category of gold nanoshells are gold layer on liposomes, as soft template. In this case, drug can also be encapsulated inside and/or in bilayer and the release can be triggered by laser light.[7] Gold is often used because it is a good absorber of light energy, it is tunable, non-biodegradable, and has imaging properties.

Yang et al. demonstrated the viability of graphene for photothermal therapy in 2010 with in vivo mice models.[8] An 808 nm laser at a power density of 2 W/cm² was used to irradiate the tumor sites on mice for 5 minutes. As noted by the authors, the power densities of lasers used to heat gold nanorods range from 2 to 4 W/cm². Thus, these nanoscale graphene sheets require a laser power on the lower end of the range used with gold nanoparticles to photothermally ablate tumors.

In 2012, Yang et al. incorporated the promising results regarding nanoscale reduced graphene oxide reported by Robinson et al. into another in vivo mice study.[9][10] The therapeutic treatment used in this study involved the use of nanoscale reduced graphene oxide sheets, nearly identical to the ones used by Robinson et al. (but without any active targeting sequences attached). Nanoscale reduced graphene oxide sheets were successfully irradiated in order to completely destroy the targeted tumors. Most notably, the required power density of the 808 nm laser was reduced to 0.15 W/cm², an order of magnitude lower than previously required power densities. This study demonstrates the higher efficacy of nanoscale reduced graphene oxide sheets as compared to both nanoscale graphene sheets and gold nanorods.