Acetamide

Acetamide (systematic name: ethanamide) is an organic compound with the formula CH3CONH2. It is the simplest amide derived from acetic acid. It finds some use as a plasticizer and as an industrial solvent.[4] The related compound N,N-dimethylacetamide (DMA) is more widely used, but it is not prepared from acetamide. Acetamide can be considered an intermediate between acetone, which has two methyl (CH3) groups either side of the carbonyl (CO), and urea which has two amide (NH2) groups in those locations.

Acetamide
Names
Preferred IUPAC name
Acetamide[1]
Systematic IUPAC name
Ethanamide
Other names
Acetic acid amide
Identifiers
CAS Number
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.000.430
EC Number
  • 200-473-5
KEGG
PubChem CID
RTECS number
  • AB4025000
UNII
Properties
Chemical formula
 C2H5NO
Molar mass 59.068 g·mol−1
Appearance colorless, hygroscopic solid
Odor odorless
mouse-like with impurities
Density 1.159 g cm−3
Melting point 79 to 81 °C (174 to 178 °F; 352 to 354 K)
Boiling point 221.2 °C (430.2 °F; 494.3 K) (decomposes)
Solubility in water
 2000 g L−1[2]
Solubility ethanol 500 g L−1[2]
pyridine 166.67 g L−1[2]
soluble in chloroform, glycerol, benzene[2]
log P −1.26
Vapor pressure 1.3 Pa
Acidity (pKa) 15.1 (25 °C, H2O)[3]
Magnetic susceptibility (χ)
 −0.577 × 10−6 cm3 g−1
Refractive index (nD)
 1.4274
Viscosity 2.052 cP (91 °C)
Structure
Crystal structure
 trigonal
Hazards
Safety data sheet External MSDS
GHS pictograms
GHS Signal word Warning
GHS hazard statements
 H351
GHS precautionary statements
 P201, P202, P281, P308+313, P405, P501
NFPA 704 (fire diamond)
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
1
3
1
Flash point 126 °C (259 °F; 399 K)
Lethal dose or concentration (LD, LC):
7000 mg kg−1 (rat, oral)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Production

Laboratory scale

Acetamide can be produced in the laboratory from ammonium acetate by dehydration:[5]

[NH4][CH3CO2] → CH3C(O)NH2 + H2O

Alternatively acetamide can be obtained in excellent yield via ammonolysis of acetylacetone under conditions commonly used in reductive amination.[6]

It can also be made from anhydrous acetic acid, acetonitrile and very well dried hydrogen chloride gas, using an ice bath, alongside more valuable reagent acetyl chloride. Yield is typically low (up to 35%), and the acetamide made this way is generated as a salt with HCl.

Industrial scale

In a similar fashion to some laboratory methods, acetamide is produced by dehydrating ammonium acetate or via the hydration of acetonitrile, a byproduct of the production of acrylonitrile:[4]

CH3CN + H2O → CH3C(O)NH2

Use
  • A precursor to thioacetamide

Occurrence

Acetamide has been detected near the center of the Milky Way galaxy.[7] This finding is potentially significant because acetamide has an amide bond, similar to the essential bond between amino acids in proteins. This finding lends support to the theory that organic molecules that can lead to life (as we know it on Earth) can form in space.

On 30 July 2015, scientists reported that upon the first touchdown of the Philae lander on comet 67/P's surface, measurements by the COSAC and Ptolemy instruments revealed sixteen organic compounds, four of which – acetamide, acetone, methyl isocyanate, and propionaldehyde[8][9][10] – were seen for the first time on a comet.

In addition, acetamide is found infrequently on burning coal dumps, as a mineral of the same name.[11][12]

Acetamide crystal structure

References
  1. "Front Matter". Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 841. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4.
  2. The Merck Index, 14th Edition, 36
  3. Haynes, William M., ed. (2016). CRC Handbook of Chemistry and Physics (97th ed.). CRC Press. pp. 5–88. ISBN 9781498754293.
  4. "Acetic Acid". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a01_045.pub2.
  5. Coleman, G. H.; Alvarado, A. M. (1923). "Acetamide". Organic Syntheses. 3: 3. doi:10.15227/orgsyn.003.0003.; Collective Volume, 1, p. 3
  6. Schwoegler, Edward J.; Adkins, Homer (1939). "Preparation of Certain Amines". J. Am. Chem. Soc. 61 (12): 3499–3502. doi:10.1021/ja01267a081.
  7. Hollis, J. M.; Lovas, F. J.; Remijan, A. J.; Jewell, P. R.; Ilyushin, V. V.; Kleiner, I. (2006). "Detection of Acetamide (CH3CONH2): The Largest Interstellar Molecule with a Peptide Bond". Astrophys. J. 643 (1): L25–L28. Bibcode:2006ApJ...643L..25H. doi:10.1086/505110.
  8. Jordans, Frank (30 July 2015). "Philae probe finds evidence that comets can be cosmic labs". The Washington Post. Associated Press. Retrieved 30 July 2015.
  9. "Science on the Surface of a Comet". European Space Agency. 30 July 2015. Retrieved 30 July 2015.
  10. Bibring, J.-P.; Taylor, M.G.G.T.; Alexander, C.; Auster, U.; Biele, J.; Finzi, A. Ercoli; Goesmann, F.; Klingehoefer, G.; Kofman, W.; Mottola, S.; Seidenstiker, K.J.; Spohn, T.; Wright, I. (31 July 2015). "Philae's First Days on the Comet - Introduction to Special Issue". Science. 349 (6247): 493. Bibcode:2015Sci...349..493B. doi:10.1126/science.aac5116. PMID 26228139.
  11. "Acetamide". Mindat.org.
  12. "Acetamide" (PDF). Handbook of Mineralogy. RRUFF Project.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.